Released June 2012 / Core i7 processor with Turbo Boost / Up to 1 GB DDR5 Video RAM

403 Soru Tümünü görüntüle

screw-thread broken, how to solve it?

guys, bad news.

when i was trying to replace my optical disk driver, i accidentally broke the screw-thread on the top right, i mean the one on AirPort/Bluetooth board by using a wrong screwdriver. so i can't take out the optical driver. :(

does anybody know how to solve this kind of situation?

many many thanks,

David

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

One of the stripped screw solutions may work - small easy out, drill, dremel tool but take much care to avoid shavings or metal bits falling to the logic board.

If this answer is acceptable please remember to return and mark it.

Bu yanıt yardımcı oldu mu?

Puan 1

Yorumlar:

thanks machead3. but you see, the one i was stuck is the one in a hole, which made me unable or really hard to do your way. almost desperate on it. :(

maybe i should abandon the idea of changing the optical drive to a HDD. sigh...

tarafından

drilling is your only option… keep a low powered vacuum near the drill bit.

tarafından

Yorum Ekle

Yanıtını ekle

tao david sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 299