Eşyalarını Tamir Et Topluluk Mağaza

Repair guides for the MacBook.

3786 Soru Tümünü görüntüle

Seçenekler

no LCD backlight sometimes, is it the inverter?

My MacBook LCD suddenly started behaving weird, sometimes i open the MacBook to find the screen in black, i can see whats on the screen if i put it iin front of light, if i closed the laptop and open it for 2 or 3 times, it works like nothing happened, i read some answeres here about the inverter and inverter cableand the LCD bulb, so , what is it most probably, and another question, i'm in germany, so do you know where can i buy thse parts from?

Thanks

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

hi ahmed,

well - it could be one of the 3 things you mentioned

the easiest way would be getting a working lid with everything in it.

changing the ccfl tubes are no real fun and you can't buy them without the complete lcd.

did you ever disassembled your MacBook or was it a used one from ebay ?

the inverter cable could be pinched or frayed.

aus welcher ecke kommst du denn ?

kannst mir ja mal schreiben: markus.weiher@gmail.com

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

1 Yorum:

Thanks Markus for your answer, i'll try to buy a new lid from ebay (hope i can find a cheap one),

yes the laptop i bought is used, and i bought it from ebay, and i disassembled it before just to change the top case (keyboard was damaged).

and i'm from SÜD :) , i'm not very well in german as i'm new to germany, i'll send you an empty email to know my address. thanks again

tarafından

Yorum Ekle

Seçenekler

I have the same problem. I've been leaving the screen open but the kids move it occasionally or it goes black on its own sometimes. Same symptoms as you. I thought it was the inverter but I dissembled the bezel and if I use a little tool to poke/jiggle the wires in the following pic http://guide-images.ifixit.net/igi/hoYqv... through the hole the wires travel into from the monitor to the motherboard. It doesn't make sense because it says those wires are for the antenna but it works every time.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Ahmed sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 1,262