Eşyalarını Tamir Et Topluluk Mağaza

Model A1174 with 2 GHz Core Duo or Model A1207 with 2.16 or 2.33 GHz Core 2 Duo

212 Soru Tümünü görüntüle

Seçenekler

iMac died after loud "pop" and will not turn on, why?

Hi,

My iMac was in sleep mode, when i moved my wireless mouse to wake it... the computer made a loud "pop" and shut off... I tried turning it on, but nothing. I tried diffrent outlets and still nothing. Someone suggested i open it up and check the Capacitors... I did, but they look fine. The ones on the power supply look fine as well. It has no warranty anymore, it's why I decided to open it up. Now i don't know what to look for, Should I just get a new power supply?

Someone please help... I know it's an old computer, but I really don't want to trash it.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
2 Yorum

after the "pop" did you smell something burnt?

tarafından

No burnt smell... Even after i opened it up... I sniffed all over, but nothing. :( I'll check the capacitors again... maybe i could've missed something.

tarafından

Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Check the diagnostic LED lights if #1 is out it's your power supply.

If this answer is acceptable please remember to return and mark it.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 4

3 Yorum:

To be honest... I did not check for lights after i opened it up... All i am sure of is that the power button had no response whatsoever. Now it's all disassembled, so probably can't check for lights any... Or can I?

tarafından

Yes - see this and this

tarafından

Hmmm... I'll have to put it back together to check this. I'll do that and get back with the LED results.

tarafından

Yorum Ekle

Seçenekler

Same exact thing happened to my iMac. I have a 2012 iMac and it won't turn on after the loud pop. I have tested the cord and the power supply and all seem to be fine. There are no burning smell and I don't think the 2012 iMacs have the diagnostics LEDs. I am worrying that my logic board has failed.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

3 Yorum:

Have you fixed your iMac since then ?

tarafından

What did you end up finding out? I have a 2012 iMac, 21.5" and they DO have the diagnostic LED's. #1 is on for me. I am having the same problems as you.

tarafından

This happened to my Late 2012 iMac. Heard a pop and smelled a bit of electrical smoke. It tripped a circut breaker and wouldn't turn on afterwards.

Pulled the thing apart. No visible damage, but the none of the diagnostic LEDs would turn on when connected to power. Replaced the PSU and it was good as new.

tarafından

Yorum Ekle

Yanıtını ekle

felipe sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 11

Son 30 gün: 32

Her zaman: 4,298