Lumia 625 completely dead after digitizer replacement

Question

Nokia Lumia 625

Part of Nokia's Lumia line of Windows smartphones. Announced July 2013.

35 Soru Tümünü görüntüle

smithbyrne @smithbyrne61323

İtibar: 71

2

3

Gönderildi: 15 Şub 2014

Seçenekler

Lumia 625 completely dead after digitizer replacement

Hi there,

II replaced a digitizer on a lumia 625 today.

The phone was working fine when it came to me, just had a cracked digitizer.

After the repair, the phone would not power back on. No signs of life whatsoever.

I have a wall charger for USB devices that has LED lights that indicate when the power is going to the device and those LED did not change colour when i connected the Lumia 625.

The computer did not detect the device either.

I put the original (cracked) digitizer back on the phone but still no life.

I have tried all the combinations of keys for soft and hard resets but still no response whatsoever.

Has anyone had any similar problems with the Lumia 625 or any lumia for that matter?

can anyone please shed some light on this for me ?

thanks

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır

Puan 1

1 Yorum:

hey guys, got mine a new flex cable, battery and the charge dock board from ebay, replaced them but the phone cannot even start, or charge. I really cannot dump this phone. i need it working

Any help i will appreciate

Maxmm tarafından 5 Nis 2017

Yorum Ekle

3 Cevap

hey guys, got mine a new flex cable, battery and the charge dock board from ebay, replaced them but the phone cannot even start, or charge. I really cannot dump this phone. i need it working

Any help i will appreciate — Maxmm

ward decru @warddecru İtibar: 1 · Answer 1 · 2014-02-24T08:40:13-07:00

ward decru @warddecru

İtibar: 1

Gönderildi: 24 Şub 2014

Seçenekler

The flex cable is damaged then. Need to put in a new flex cable

Bu yanıt yardımcı oldu mu?

Evet Hayır

Puan 0

3 Yorum:

thanks, which ribbon though ? the digitizer ribbon and the battery ribbon are attached to their respective parts

smithbyrne tarafından 26 Şub 2014

The ribbon that connects the two motherboards and the start and volume buttons. it's glued to the frame and even the smallest of crack can break it.

ward decru tarafından 27 Şub 2014

again, thanks for all your help much appreciated.

I will try replace this ribbon, bt could you possibly link me to somewhere that sells it ? I don't really know the technical name for it and I have tried entering "lumia 625 motherboard ribbon" into ebay with no results. So do you know the proper name for it ?

I'm in Ireland BTW

thanks

smithbyrne tarafından 28 Şub 2014

Yorum Ekle