Eşyalarını Tamir Et Topluluk Mağaza

Repair guides and support for riding lawn tractors sold under the Murray brand name, currently owned by Briggs & Stratton.

139 Soru Tümünü görüntüle

Seçenekler

Engine cutting off when brake/clutch pedal released

I have a Murray riding mower model 46503X8.

I depress the clutch brake pedal to start the engine. The engine starts easily and runs when the brake/clutch switch is depressed.

If I release the brake/clutch switch the engine shuts down. I replaced the brake /clutch switch and the pto switch, but the problem did not go away.

I did the following test. With the engine running and the brake /clutch switch depress, I engaged the cutting blades (pto switch) and the engine shuts down.

I have an electrical diagram but need help to solve this problem.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 2
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Further checks revealed that the seat switch was defective. Once I replaced this, I was running and cutting the grass.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

1 Yorum:

I had the same problem with the brake pedal but my seat safety switch was disabled before the problem arised.... and everything worked fine ???

tarafından

Yorum Ekle

Yanıtını ekle

Harry sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 25

Son 30 gün: 97

Her zaman: 17,375