Eşyalarını Tamir Et Topluluk Mağaza

Late 2011 model, A1278 / 2.4 GHz i5 or 2.8 GHz i7 processor.

591 Soru Tümünü görüntüle
Soru Kapandı

Seçenekler

Can the fan connection touch metal elements on the logic board?

Good morning. I just finished cleaning my macbook's fan. But I didn't take the precaution of taking a picture of the fan and it's connection before I began. Therefore, now that everything is back in place I don't know where and how exactly were the 4 thin cables conecting the fan to the logic board. Can this small cables touch the metal bits on the logic board? I feel like something might melt and malfunction. Following the feel and shape of the cables I twisted them softly on themselves once to steer clear of anything around it. Is this correct?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
2 Yorum

Running your machine without a fan is like putting your dog in a car with the windows rolled up in the middle of summer. Please give us the last three figures of your serial number, located in very fine print on the back of your machine so we can get you to the correct guide and you can fix those cables so you don't end up with an over cooked hot dog.

tarafından

The last three figures are V14. I'll be awaiting your reply. Thanks!

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Look at this.

If this answer is acceptable please remember to return and mark it.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

1 Yorum:

Thank you machead3 for you reply. I checked the suggested guide but unfortunately it didn't solve my question. Regardless of that, I reassembled my Macbook Pro so that the cables I referred to previously didn't touch anything around it. It's been working just fine for almost a month, so I'm guessing my approach was okay. Thanks a lot again!

tarafından

Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 77