Fan going full blast after battery and fan replacement

Replaced battery and fan on my mid 2009 13" Macbook Pro.

On first startup fan went on full speed, and stays there.

Tried SMC and PRAM reset, unplugged/replugged battery and fan, still same problem.

iStat reports fan speed 0rpm when it`s running full blast, temperatures on cpu reports normal.

Any ideas.?

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Who's Fan did you use? Did it mess up the SMC services?

You may want to take a look at the temperature section are any of them high (wrong)? If not you may have a pinched or damaged the fan cable or the new fan is also bad.

Bu yanıt yardımcı oldu mu?

Puan 1

Yorumlar:

I used the OEM fan from iFixit, replaced it as the old one was a bit noisy.

Tried replacing the fan with the old one and problem was gone.

New fan is going back to ifixit. Thx for the reply.

tarafından

If this answer answered your question please remember to rate (score) and mark it accepted.

tarafından

Yorum Ekle

Yanıtını ekle

christian sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 9

Her zaman: 377