Bluetooth not working after disassembly

MacBook Pro 15" Mid 2009 (glossy display)

After replacing the hinges of my MBP, my bluetooth stopped working, it says "bluetooth unavailable" while wifi does work perfectly.

i've tried to reset the NVRAM,PRAM but no result.

I have Windows 7 running on bootcamp and bluetooth is inexistent there too.

Any ideas to fix this issue please?

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

The glossy display version has the BlueTooth board located in the black plastic clutch cover which is part of the display unit. You will need to remove the display assembly to then access the board.

Here's the display cover teardown: MacBook Pro 15" Unibody Mid 2009 Display Replacement. Then jump to this guide: MacBook Pro 13" Unibody Mid 2009 AirPort Antenna Replacement from Step 15 onward will walk you though the AirPort board removal.

For some reason the correct guide is missing for the 15" Glossy Airport board and antenna.

I'm sure you'll find something has gotten in and corroded the contacts. You may end up replacing the Airport board or the cable.

MacBook Pro 15" Unibody Mid 2009 Display Resmi

Kılavuz

MacBook Pro 15" Unibody Mid 2009 Display Replacement

Zorluk:

Orta

30 minutes - 1 hour

MacBook Pro 13" Unibody Mid 2009 AirPort Antenna Resmi

Kılavuz

MacBook Pro 13" Unibody Mid 2009 AirPort Antenna Replacement

Zorluk:

Orta

50 minutes

Bu yanıt yardımcı oldu mu?

Puan 1

Yorumlar:

thanx for the reply Dan! i'll be checking the airport board

tarafından

Yorum Ekle

Yanıtını ekle

joe sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 10

Her zaman: 558