Model A1174 with 2 GHz Core Duo or Model A1207 with 2.16 or 2.33 GHz Core 2 Duo

277 Soru Tümünü görüntüle

No power most of the time

My Imac won't switch on. I broke it down to view the diagnostic LEDs but can't find them - even after removing the screen. While i had it open, i cleared out all of the dust with a hairdryer and it started working. I put it all back together and its stopped working again.

Does the intermittant nature of this fault mean its not the motherboard or the power supply.

Is it the switch.


Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

Mağazamıza Göz Atın

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

You do need to be careful here with the hair drier! Depending on the unit it could damage your system with either ESD or poor grounding.

Hair driers are not quite powerful enough to push the deep dust, nor can they be focused as fine a point as compressed air (can'ed air) can. Compressed air also does not create ESD.

I would open up the system again and use a soft paint brush scrub down any remaining dusty areas and use can'ed air to push away the lat bit of dust.

Check your connections you may have a loose wire. Also this systems power supply has been known to go. Look at the capacitors do you see any wet areas around there bases and/or see the tops bulging up a bit. That would be a sign of a cap that is failing.

Given the age of the system I would also refresh the thermal paste.

But before you go to far here, consider the costs and what you use the system for. It maybe time for a new system.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

martin t sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 71