Eşyalarını Tamir Et Topluluk Mağaza

Second generation of Wi-Fi iPad, released on March 11, 2011. Model number A1395. Repair is difficult and will require heat.

250 Soru Tümünü görüntüle

Seçenekler

Brainstorm: iPad2 was dropped, now black LCD but backlight works

A dropped iPad 2 has been brought to me by a client. LCD screen is black but backlight turns on. I did some research and it seems there are two reasons this is happening: 1. The LCD is bad, or 2. The logic board has a broken circuit or jumper that needs to be bridged/resoldered. I really don't want to have to open it unless I know for sure what I need to fix. Can a backlight still work if the logic board is the problem? Is there anything I can try, short of opening it up, that can help me pinpoint what the solution would be? I don't have the proper soldering equipment yet, so I don't want to open it and then realize I'll have to send it out for resoldering. Thanks in advance.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

Hi,

I can't understand you well. The screen can't be black if the back-light is working.

You can't be absolutely sure without opening and replacing the LCD display.

Yes, there is solution for a not working back-lights. You must replace or make a jumper for one coil. But this is solution for not working back-lights. In this situation you can see an information on the screen from a specific angle.

But if you haven't information on the screen and if this happens after a hit, 90% the problem is with LCD display. Inspect the LCD from different angles. Maybe you can see a small rift somewhere.

Without opening and testing with another LCD you cannot be sure where is the problem.

Regards.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Seçenekler

Hello this can be simply fixed by opening up disconnecting the lcd and reconnecting and in most cases it will turn on with no problems..

This is a common fault in the iPad2 with the lcd disconnecting when dropped..

I'd it doesn't work then next step is a lcd replacement if a new lcd doesn't work it's a board problem..

Only way to find out is to get stuck in and open it up..

Don't understand why you won't open it up and troubleshoot the problem

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Yanıtını ekle

PCHookups sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 5

Her zaman: 782