Repair and support for the controllers that shipped with the PS3. Released mid 2008, the six-axis lithium battery powered controller (CECHZC2) is straightforward to repair.

118 Soru Tümünü görüntüle

Where this little part came out from?

I had to replace the analog stick caps and after putting the controller together again it works perfectly, however a little plastic (rubber) part was left out as I couldn't find its place, and none of the guides show where it belongs. I would like to put it back to its place whether it has any purpose or not. This is it: http://pbrd.co/1rUppwn

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Hey. I just had the same problem. It belongs on the back side of the controller casing, on the interior. It is used for pressing the contact site of the reset button. The side that is flat lies flat against the casing, the side that is 'pokey' faces away from the casing and toward the board.

If you have another controller, you can (slowly) take it apart and see exactly how it is supposed to sit.

Bu yanıt yardımcı oldu mu?

Puan 0

Yorumlar:

Thank you, I totally forgot the reset button :)

tarafından

Yorum Ekle

Yanıtını ekle

Abrahala Gabra sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 133