Eşyalarını Tamir Et Topluluk Mağaza

Canon PowerShot A series point and shoot camera released in 2006, with a 6.0 Megapixel camera and 4x optical zoom lens.

6 Soru Tümünü görüntüle

Seçenekler

recently started taking solid black pictures

up until recently, my camera works perfectly. Then about a week ago, it started taking solid black pictures. When trying to take a photo I can only see black in the screen. However, I can see previously taken pictures in the screen. I saw this problem listed under the S series. I tried the resolution by looking down the zoom lens,but I can see the "Flicker". Could this be something else? How can I fix it?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan -1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Shelly, could be that the OPTICAL UNIT is defective. (The shutter in the LENS part is not opening). It is also possible that you have a CCD sensor error. Usually a replacement of the lens assembly will resolve it, but there is always a possibility that it is an issue of the CCD circuitry on the mainboard. I'd start with a new lens. Hope this helps, good luck.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Yanıtını ekle

Shelly sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 6

Son 30 gün: 8

Her zaman: 207