Since yesterday, my thunderbolt goes to black screen once I close my macbook. The screen works, because when my macbook is open and connected to Thunderbolt, it shows my screen picture on the Thunderbolt. Once closing my laptop to start working on the Thunderbolt, the screen goes black.
After restarting the whole, it is ok for a few seconds and then goes black again. What can it be?
Bu iyi bir soru mu?
İtibar: 116,3b
66
68
359
Requirements for closed-display mode:
Power adapter
External keyboard, mouse, or trackpad
External display
Enable closed-clamshell (display closed) mode
Note: If your external display isn't recognized when it is connected and the computer is powered on, try connecting the display while the computer is asleep or while the computer is off; wake or power on the computer after you connect the display.
If this answer is acceptable please remember to return and mark it accepted.
Bu yanıt yardımcı oldu mu?
Son 24 Saat: 0
Son 7 gün: 0
Son 30 gün: 0
Her zaman: 5,909
4 Yorum
Help us help you. The more complete the description of your problem is (what MB you're using - there are many versions, what OS you're using -there's a lot of those too, this could be a "feature" of Mavericks/Yosemite-there have been a lot of sleep/wake from sleep issues with those two OS releases) the more assistance we can provide, and, the sooner we can provide it..
originalmachead tarafından
Hi, it's a recent Mac Book Air 13inch and OS X Yosemite vs 10.10.1
Sara Coene tarafından
See my answer below - you must connect an external Keyboard, mouse or trackpad, in order for closed lid display to work. Also notes for solving recognition issues.
originalmachead tarafından
Solved. Thanks machead3, it was an issue with the power connection, which was not working anymore.
Sara Coene tarafından