Ana içeriğe geç

The LG G Watch R is a Smartwatch manufactured by LG that includes many features of a Smartphone and a full-circle P-OLED display.

26 Soru Tümünü görüntüle

What can I do about my scuffed watch?

I have recently (accidentally) scraped my Lg g watch r against a wall. A lot of the black paint has come off the bezel and in parts it has gone down to metal. How can I get this fixed? All it needs is some paint. There is no actual physical damage, just the fact that in places the paint has come off. I've spoken to LG and offered to pay for it, but it's not something their repair team can do.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 4
1 Yorum

You can do what this guy did:

https://www.youtube.com/watch?v=uKq8Fl7r...

tarafından

Yorum Ekle

4 Cevap

Filtre ölçütü:
En Yararlı Yanıt

The colour on the watch is not a paint, but oxidising or bluing. So if you scratched it, it is imposible to restore this, unless you will take it apart and repeat all the oxidation process.

On other hand there are ways to cover that up. I'd recommend to try black nail polish or, so called, gel polish (requires UV lamp). They are available in gloss and matt. You probably would need to restore it from time to time, but it will last longer than any conventional paint.

Bu yanıt yardımcı oldu mu?

Puan 2

1 Yorum:

Try car model or hobby paint instead of nail polish, it will last longer!

tarafından

Yorum Ekle

Just get a roaterty tool and sand off all the paint and polish it what you have left is the exposed beautiful stainless steel.

Bu yanıt yardımcı oldu mu?

Puan 0

2 Yorum:

I didn't really want to do that because I really like the black paint LG have used. I wish I could get that black paint from somewhere, then I'd do what you've said and paint it black after

tarafından

You could try taking a can of mate black spray paint that matches the color and take the can and spray it into the lid then take some of the paint and with a tiny paint brush and touch up the scratch.

tarafından

Yorum Ekle

If the finish is oxidized or DLC, you can dismantle it and take it to a gunsmith. A capable gunsmith can take off some or all of the finish and redo the blueing.

Or you can send it to International Watch Works in Cary , NC, they are renown for doing DLC coating on fine watches. It's not cheap, probably more than the cost of a replacement watch.

If these aren't appealing, I think the DIY options presented here are your next bet. This watch won't last forever anyway, so I would think a frugal method of repair is best.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

I use a fine-tipped black permanent marker pen (one that says it can be used on metal) ... you might have to go over the scratches a few times to hide them ... very cheap, but quite effective

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Jag Mathauda sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 18

Son 30 gün: 81

Her zaman: 30,861