Eşyalarını Tamir Et Topluluk Mağaza

Model M8413 or A1007 / 600, 700, 800, or 900 MHz G3 processor

36 Soru Tümünü görüntüle

Seçenekler

Problem

Hi my name is leandro i have a Ibook G3 14 and i was having a issue with the display so i tried to fix it puting a shim in the diplay chip but now after all my computer doesnt turn on after I finish and i dont no why. it was all ok before that i had problem with a blue and white cable near the Modem that was conecte to the keyboard palm rest or the turning on button the socket was out and i put it again i dont no why it does not turn on you think i forgot something else? thank you!!

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

6 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

I'm not sure I understand the description of the problem, but one thing I would recommend is keeping the computer open, i.e. just let the topcase/rest on top the board while it is plugged in. That way, you can verify your connections, try powering it on, unplug/plug in another connection, try powering it on, etc. Nothing is more frustrating that putting an iBook all the way back together only to realize something else is wrong and you have to go back in again.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle
En Yararlı Yanıt

Seçenekler

I would try soldering two wires to the contacts on the board and soldering the power button port to the end of the two wires.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

2 Yorum:

You think this is the problem?

tarafından

I'm not sure I fully understand but if your power button connector socket has come off the logic board you could definitely try my suggestion.

tarafından

Yorum Ekle

Seçenekler

Well i am just making like contact with the base with something to see if its turning on is not solded.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

1 Yorum:

You mean the port isn't soldered onto the board?

tarafından

Yorum Ekle

Seçenekler

yes i mean that but i think that it should turn on making contact with the board with something.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Seçenekler

There is no way to turn on teh computer like in other way or with a trick?

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Seçenekler

I don't know I comprehend the depiction of the issue, however one thing I would suggest is keeping the PC open, for example just let the topcase/lay on top the board while it is connected. That way, you can confirm your associations, take a stab at controlling it on, unplug/plug in another association, have a go at driving it on, and so forth Nothing is seriously baffling that putting an iBook right back together just to acknowledge something different isn't right and you need to return in once more. Source

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

superbat sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 5

Son 30 gün: 12

Her zaman: 800