Ana içeriğe geç

Repair guides and support for vehicles manufactured by Willys-Overland, an American automobile company known for its design and production of military Jeeps (MBs) and civilian Jeeps (CJs) during the 1900s.

2 Soru Tümünü görüntüle

replace the front locking hubs 4x4 on a 1981 cj5 jeep

how do i replace the front hubs and what is best to replace with

driver side front hub cracked I need to replace it or both ??

what should I buy whan replaceing it or both

I saw in 1981 they used 5 bolt (this is 5 bolt) pattrens

is it better to go to 6 bolt what all do io need to change if I could do it

(I drive it in the pasture 3 times a year or so )

what all should I order and replace extra parts while I have it apart

is their a better place to buy and get informantion on how to get it done books, u-tub , video .

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

harrisonkats, stick with what you got for now. Replace both hubs at the same time. Use Warn hubs for a decent quality. Start off really thinking which way you want to go with your Jeep. Very important for you will be to determine which front axle you have, Dana 3o may be. Time to start learning to identify what you have and go from there. Remember that a good Jeep is built, not bought

Block Image

Block Image

Bu yanıt yardımcı oldu mu?

Puan 3

1 Yorum:

Where can I buy these parts? I need a clutch nut and dial screw . Thanks

tarafından

Yorum Ekle

Yanıtını ekle

harrisonkats sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 6

Son 30 gün: 15

Her zaman: 1,371