Ana içeriğe geç

Apple iPhone 5s, 10 Eylül 2013 tarihinde duyuruldu. Bu cihazı tamir ederken daha önceki modellerde kullanılan aynı tornavida ve plastik açma araçları gereklidir. GSM/CDMA olarak, 16,32, 64 GB kapasiteli Gümüş, Altın ve Uzay Grisi renkli modelleri mevcuttur.

3906 Soru Tümünü görüntüle

Some problems after Battery replace

Hi,

I have changed my battery and i have a lot of problem...

First i have change the battery and i have a problem, the Touch Id doesn't work.

In Settings when i want to activate it, it's written "Fail".

I don't know why, because i have desassembly the phone without problem..

Few days later, i need to charged 3/4 times my iPhone per day and it's a new Battery ( very good quality buy here) and my External Speaker Doesn't Work...

What can i do ?

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 3

Yorumlar:

Have you tried to restore from itunes?

tarafından

Yorum Ekle

Dizüstü Bilgisayar Bataryaları

An easy fix for a big power boost.

Hemen Alışveriş Yapın

Dizüstü Bilgisayar Bataryaları

An easy fix for a big power boost.

Hemen Alışveriş Yapın

3 Cevap

Filtre ölçütü:
Seçilen Çözüm

You may have accidentally damaged some components during installation. Have you inspected the ribbon cables to see if there is any damage? It's always a good idea to go back through and make sure all the connections are clean and fully seated. You can clean them with isopropyl alcohol on a cotton swab, and make sure they're completely dry before you close up the phone again.

Does the home button click function still work?

Bu yanıt yardımcı oldu mu?

Puan 1

Yorumlar:

Yes the home button Work, just the Touch ID and the external speaker doesn't work..

tarafından

Yorum Ekle

Download a programme on laptop called ibackup bot it will actually tell you how many times the battery has been charged..

Most new batterys you get are never original and have been charged I've 100 times unless you have a good supplier

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

I had the same problem, found sensor cable was not seated fully. Took quiet a few goes to get it right.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

robinphi58 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 152