Ana içeriğe geç

The Samsung Galaxy S4, model i9505, features a 13-megapixel rear camera, and a 5-inch 1080p display.

649 Soru Tümünü görüntüle

New screen with no adhesive on the top

Hi,

This is a fairly elementary question but here goes... I replaced a Galaxy S4 lcd assembly and the adhesive was supplied on the back of the part. Everything is fine except I'm not satisfied with the top of the phone around the earpiece as it is not stuck down properly, likely because the included adhesive didn't go up that far. There's really not a lot of room there to use 3m double-sided adhesive and I really don't want to give the phone back to the guy when the top is not secure. I also am hoping to avoid having to dismantle the whole phone and undo all of my work. Does anybody have any ideas as to how I could get this sealed? I can get a fingernail in, so as much as I hate to use the word, super glue comes to mind. Any help is appreciated.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

I've found it is very difficult to get the top to stay down after screen replacement on an s4. The answer in the long term for me was using a better adhesive and custom cutting my own pieces. It's difficult to adhere down the area of the LCD where it has the cable assembly behind it. Yes, super glue will work in a pinch, i've done it many times on s4's and s5's, just be careful about getting in on the plastic midframe because once it dries, it will not come off there without making it look terrible. In short, get better tape. I recommend Tesa double-sided acrylic stick tape. Hope this helps

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle
En Yararlı Yanıt

Have you tried heating it up at the top? Adhesive may stick down better. :-)

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

bjblatz sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 94