Ana içeriğe geç

Repair information for the Bose QuietComfort 2 acoustic noise-canceling headphones. Released in 2003. Model number: QC2.

24 Soru Tümünü görüntüle

Stirrup brackets attatching phones to swivel broke

The stirrup that holds the ear cup and attaches it to the swivel on the headband is broken. I cannot find a repairpart anywhere.

Short of casting a mould and making one myself whats to be done?

Rant:

I recieved these as a gift. The sturrup broke in less than a year.

bold text

How can a company charge 200 bucks, or is it 289, and build it with such inferior parts. These sturrips are plastic, and none too thick. Grrrrrr

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 5
Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

There have been MANY comments about just this breakage and the plastic itself is indeed very weak. In every case Bose have stated that they can't (won't) repair and no replacement parts are available. Instead they only offer an expenditure of minimum $90 to upgrade.

Fortunately, I'm very handy when it comes to fixing things and I tested both superglue and polystyrene cement on the plastic. I have as a result used superglue on one side and poly cement on the other side.

Superglue has an advantage because once one application is dry, then additional applications can be added to build up a very strong joint.

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle
En Yararlı Yanıt

I used polymorph plastic (polycaprolactone) to build a support all around the broken part, and it's not pretty but it seems to be holding up fine.

Bu yanıt yardımcı oldu mu?

Puan 3

1 Yorum:

This was a fantastic idea. I had never heard of this material before either, despite being around (& doing) lots of clay, plasticine, wood putty, and papier mache. I probably should've used some epoxy with it.

tarafından

Yorum Ekle

Yanıtını ekle

sam marasco sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 11

Her zaman: 5,019