Eşyalarını Tamir Et Topluluk Mağaza

Model A1213 / 8, 16, or 32 GB capacity

216 Soru Tümünü görüntüle

Seçenekler

Bought a new LCD- still no image.

So, the classic iPod Touch in the cat's water bowl trick...it's a corker!

I bought a new screen (color display) for this 8GB 1st gen. and installed it, but there is still no light. I can see what's on the display if used under a very bright light, but both old and new screens have no backlight. What other part might I need?

I was really excited to see it spring back to (full) life with the new screen, but was sorely disappointed. Still plays music-it's all there except a light.

Help!

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
1 Yorum

Was only the lcd replaced or the digitizer as well? (usually they do come together.

tarafından

Yorum Ekle

3 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

If I read correctly, your touch fell into water / got immersed?

This could have done damage to other things than just the LCD.

maybe the problem is somewhere else (specially as both your LCD's act the same)

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

3 Yorum:

I would think this- except when you read the rest of his post, you see it's fine except the screen isn't bright. Might be worth looking at the logic board though.

tarafından

Thanks for the response. It was this part:

[bağlı ürün eksik veya kapalı: IF132-000]

..not the top cover/digitizer. Some of these terms seem interchangeable, hence the link to clarify.

Thanks

tarafından

Everything else works, which is why I am confused. Where else might I look? I'm not going to replace the logic board because they cost more than it's worth. The only none functioning part is the light, and I thought that was inherent to the LCD, hence I bought a new one.

tarafından

Yorum Ekle

Seçenekler

In other post I read that there is a inverter section on the main logic board that drives the back light on the LCD. If the inverter is bad replacing the LCD will not fix the backlight problem.

That said it still could be a bad ground or dirty contact causing the issue.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2
Yorum Ekle

Seçenekler

There are utube video's on how to replace this part on the logic board of an iphone, I have not tried this nor can I find this for my 2nd ge. touch or 5th gen. classic

a good first step:

http://www.youtube.com/watch?v=BUDA0CN5z...

how to replace the actual defective coil that controls back light:

http://www.youtube.com/watch?v=zHaWA6hGg...

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

yakplanet sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 3,745