Ana içeriğe geç

Repair guides, troubleshooting information, and service help for refrigerators manufactured by General Electric (GE).

234 Soru Tümünü görüntüle

What is proper temp setting for GE freezer/refrigerator?

I have a GE side by side refrigerator freezer (2004 yr model )

  • temp control is a picture of thermometer and a slide up or down
  • what is correct position
  • what position is colder
Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
1 Yorum

hmmm, I don't know how to deal with freezers, but it seems that there is some problem with temperature control

tarafından

Yorum Ekle

4 Cevap

Filtre ölçütü:
Seçilen Çözüm

Usually up is for higher temperatures and down is for lower.

The optimal setting is dependent on the ambient temperature and how many times it is being opened during the day. Temperature fluctuations are also dependent on how full it is. The items in a refrigerator help retain the cold.

To ensure that your refrigerator is doing its job, it’s important to keep its temperature at 40 °F or below; the freezer should be at 0 °F. Since few refrigerator controls show actual temperatures, using an inexpensive freestanding appliance thermometer will allow you to monitor the temperature and adjust the setting of the refrigerator and/or freezer if necessary. Buy one for the fridge, one for the freezer, and check them often.

Bu yanıt yardımcı oldu mu?

Puan 4

2 Yorum:

i set my frezzer to 0 and still had frost in the icebox why would this be happening?

tarafından

If there’s any gap in the area around the seal it will cause frost to build up in the freezer. That happens very easily when there is already some frost present

tarafından

Yorum Ekle

Freezer 0* fresh food 36*. If your refrigerator temperature control is a dial, try turning it to the middle setting. After a couple days you can adjust it higher or Lower if need be. Allow 48 for the temp to adjust.

If that doesn't help, it could have several other issues. I'd need a model number to be of more help.

Bu yanıt yardımcı oldu mu?

Puan 3

4 Yorum:

Hello Maria Marquez. Check the humidity control on crisper drawer. You want low humidity. Any temperature changes will take 24-48 hrs. If no change, include your model number. Thank you.

tarafından

I turned down both the refrigerator and freezer so that I can unplug it to clean the back. Plugged back in but the cold controls are not turning on. What did I do?

tarafından

I set the frizer temp on "0" deg Frenhit end get 28 deg Frenhit in the cooling compartment!

How can it be fixed?

tarafından

The freezer should be set for 0*F and the fresh food section at 36*F. I don’t know what model you have to determine more than that. There are several different ways a refrigerator regulates tempature. I’d need the model number

tarafından

Yorum Ekle

Hello, I have GE refrigretator, but my vegestables,luttuce,onions,cucumber, and everything else freeze ,by the time im going to use it,i have to throw them away, what can i do to avoid this,?or whats the right temperature? thank you, Maria Marquez

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

I have a Gth181bxcrww model and its making loud noise. What setting shoul i have freezer and refrigeratoron .its a dial model

tarafından

Yorum Ekle

I have a fridge freezer fridge General Electric No: PCG23NHMHFBB

TG402277

Please help me regarding the temperature

It had three settings at the

1 Set is at -5

2 Custom coo is at 6

3 The other is at 36 set

Help regards Ann Ryan

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

I need help with my GE refrigerator because I don’t know how to set up the temperature

tarafından

Yorum Ekle

Yanıtını ekle

nietta sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 12

Son 7 gün: 113

Son 30 gün: 431

Her zaman: 88,843