Ana içeriğe geç

1.83 GHz Core Duo or 1.83, 2, or 2.16 GHz Core 2 Duo A1208 (EMC 2104/2110/2114/2124)

201 Soru Tümünü görüntüle

Dead iMac where do I start?

My iMac took a fall and now is totally dead. No response when I try to power up. It landed on its back after being hit in the screen.

Where do I start to troubleshoot?

I replaced the power cord

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
Yorum Ekle

6 Cevap

Filtre ölçütü:
Seçilen Çözüm

You might have damaged the logic board, or power supply in the impact, these are the most likely components to be damaged in a fall thet can result in the machine not booting. if you are willing to open your iMac, you should try and inspect these parts for visable damage. also, an impact like that, almost certianly killed the hard drive, so even though it shouldn't stop the machine from booting, it will most likely need to be replaced.

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

does the screen not even light up? do you hear any chimes when you try to start it up?

are you willing to try opening it yourself? there's not much other debugging you can do at this point if it doesn't even power up, I would think, without looking inside. If lucky, perhaps just some connection has come loose, but on the other hand the fall may have physically damaged something serious like the logic board. no way to easily tell from outside if there's not even the slightest sign of life when you try to power on.

the repair guide for your model should be here, assuming it's identified it on the right

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

You need to open it up and take a look- you may get lucky and just see a cable is loose, but you'll probably come across broken/damaged parts, loose cables, and parts in the wrong place if it got shaken about.

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

another thing, memory and other components sometimes fall out and nothing is broken. I know someone who had a major problem with dropping a PC, it didn't turn back on, after trying a lot of stuff. When he opened it out he saw the CPU was just slightly out and needed to be pushed in.

tarafından

Yorum Ekle

most likely the hdd is now broken....

you can always take ur mac to the mac gallery the is near you and have them check it out.....they will do it for free.....when you know what's wrong you can come back here...

Bu yanıt yardımcı oldu mu?

Puan 0

2 Yorum:

No, very unlikely, or at least, it's possible, but that's nowhere near the range of likelyhood. If anything, as Chris Green said, Lboard or powersupply.

tarafından

mac gallery? free?? I will tear in to it as soon as I gather all the tools. Thanks to everyone who contributed. rev

tarafından

Yorum Ekle

Can you change the PRAM Battery in the 17"intel iMac. It comes on but I here the bong sound and sometimes the screen stays gray and sometimes it comes all the way on I have read a little on the problem but on this site cant find the guide for it help

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

imac dead how do repair

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

rev sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 4,676