İtibar: 13
1
How do I change the power button of my iMac 21" My iMac has a power button problem. I have to keep pressing it until it starts.
I think it is an issue with the Button from the first day. It's a 2010-2011 model.
Does Apple have an out of warranty solution for this? Personally, I think the power button should be replaced. How to do this?
Bu iyi bir soru mu?
İtibar: 480,2b
35
329
971
You may have a logic board or power supply problem. The power switch is a soft switch design. It uses a low voltage logic to then fire off a relay on the power supply which then turns on the computer.
If you are able to use a multimeter you could take a measure of the switch to see if its working and you can also check the rest of the circuit. Follow this IFIXIT guide: iMac Intel 21.5" EMC 2428 Logic Board Replacement. Jump down to Step 22 and locate the Purple marked connectors. The lower one is the power switch.
Bu yanıt yardımcı oldu mu?
Son 24 Saat: 0
Son 7 gün: 0
Son 30 gün: 9
Her zaman: 6,143
1 Yorum
Hi There
I had same problem, but a little heat to the back around the Power Button will loosen the glue which will allow you to remove the power button assembly for easy soldering.
Gee Tee tarafından