Ana içeriğe geç

Laptop released by Dell in 2005, features a 15.4" display and Intel Centrino processor.

21 Soru Tümünü görüntüle

forgot password at boot up and cant get into windows

forgot password at boot up and cant get into windows was woundering how to fix this

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 69
18 Yorum

My Dell computer has password in setup option, i cant run my boot sequence because is unlocked and i have forgotten the password what should i do?

tarafından

Hi edeye

just looking at your question looks like you got windows ..if its a boot up issue i cant help you. but if you can reset your windows password to login then this might help http://www.digitalgrog.com.au/software/r...

tarafından

i have a inspirion and my kids use it but i cant get in . i dont know the username and password. How can i reset it?

tarafından

You may need a Windows password recovery program to reset your windows password. iSeePassword may work for you. http://www.iseepassword.com/windows-pass...

tarafından

BIOS Setup wont accept capitals. If you thought you entered a capital it may have been omitted.

tarafından

13 tane daha yorum göster

Yorum Ekle

8 Cevap

Filtre ölçütü:
Seçilen Çözüm

I assume your running Windows XP. If you have an Administrator account, it doesn't have a password by default. If you can log in as that, you can change your other user's password going to Control Panel/User. Select the account and select change password.

If you don't have an admin account, shut down and restart. While the computer is booting, press F8 to enter the Boot menu and boot in safe mode. Select Run from the start menu and type control userpasswords2. Select the account and select reset option. Type a new password into new password and confirm and your done.

Bu yanıt yardımcı oldu mu?

Puan 29

24 Yorum:

+

tarafından

Thank you! That was quite helpful.

tarafından

Thank you so much!

tarafından

Save mode want password too.

tarafından

hello I'm vskylark, I have a dell inspiron 6000. when i turn it on, it goes to a screen saying (this computer is protected by pass word authentication, cannot access data without correct password) then it ask to type in system or administrator password. I tried the F2, F8,F12. is there anything else i could try? Thank You

tarafından

19 tane daha yorum göster

Yorum Ekle

I get computers donated to me which I rework and give

to folks who can not normally afford one.

Some of these have passwords unknown to me. There is

usually a shorting plug somewhere on the logic board

that lets you clear all passwords. It is usually labeled.

Sometimes you get lucky and there is a diagram inside

the case that shows where everything is.

Bu yanıt yardımcı oldu mu?

Puan 8

4 Yorum:

what is a logic board?

tarafından

What is a shorting plug ? And how do I find it?

tarafından

Forgetting passwords is a real hassle,all i know, which is good at password recovery /reset for Windows computer/laptop : https://www.recoverywindowspassword.com/

tarafından

So easy,you should do something like this: https://www.mobiledic.com/windows-topic/...

Don't worry, unless your computer is dead, I've done it several times on my computer.

tarafından

Yorum Ekle

All you need to do is for resetting BIOS password you need to take your motherboard`s backup battery off for about 10 mins and then put it back to turn your system on again. If the problem still persist then you need to do the same process for like 20 mins so in this way your password shall be reset.

Bu yanıt yardımcı oldu mu?

Puan 8

1 Yorum:

I need a system password

tarafından

Yorum Ekle

My desk top computer dell i forgot the password then i reboot pressing F12 and entered bypass password then prompt a box

DELL DECURITY MANAGER

This computer system #62LD5W1-1D3B, is protected by a password authentication system. You can not access the data on this computer with out the correct password .Please type the system or administrator password

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

I have a Inspiron 6000 Dell laptop I have one password in the internet options for the content advisor supervisor password required for this and I don't know it can anyone please help me out with this.

tarafından

Yorum Ekle

Download and run De-CMOS2

Check the box "Clear CMOS" and Click proceed

And that's all

Restart and enter bios with no hassle......

Bu yanıt yardımcı oldu mu?

Puan 1

3 Yorum:

wao, this is great and wonderful. thanks

tarafından

If you cannot start your windows, how can one download De-CMOS2?

tarafından

Download it from enother pc to removable disk and run the de-cmos2 to clear cmos data to default..

tarafından

Yorum Ekle

I can boot up Bios and add password since I don't have one. Then I boot up to password screen and don't remember it so how can I bypass that screen and go to windows 10.

Please help me.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

if u cant even get into windows then try this.

1-st easy road on the log on screen pres ALT-CTRL-DEL and on the classic logon that will apear trype Administrator on the user and blank pass

if u have the built in admin enabled and did not set passw to it when installing it will boot nicely and then u can change ur users pass in the controll panel users menu.

2-nd road simply get from someone or download from someone Hirens boot cd and when booting from hirens u will find among its tools the reset passw tool witch will let u reset any users pass in ur pc to blank .works on any pc on any user and will solve this problem 100%

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

If you have a repair disk, of course you can try it to crack Windows password. But if you don't have maybe you can consider using Ophcrack. Most time it is helpful but cannot guarantee 100% successful reset.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

EDEYE sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 4

Son 7 gün: 10

Son 30 gün: 41

Her zaman: 262,038