İtibar: 1
1
I tripped over the ethernet cord attached to my 360 and it took a 3-foot dive. Now it wont read discs. Everything else seems to work fine and I can hear the discs start to spin, but after about two seconds it stops and the dashboard says open tray. I would rather avoid opening it up but if thats what it takes then so be it. Any help would be greatly appreciated.
Bu iyi bir soru mu?
İtibar: 2,5b
15
8
2
The laser most likely is jammed in the back of the drive. This is a common thing we see when the systems are dropped. Just open up the system and realign the drive. While you are in there, give it a good cleaning. The drive should be dust free. The railing that the laser guides on, make sure that it is clean and well lubricated with gear grease of some sort.
Bu yanıt yardımcı oldu mu?
Son 24 Saat: 0
Son 7 gün: 0
Son 30 gün: 0
Her zaman: 1,796
