İtibar: 1
1
I had this screen for about three years and its suddenly gone mad ;).
When i turn it on it just blinks, showing a black screen and my desktop. After a couple of minutes it works like a charm.
Same problem on DVI/VGA and on three different machines.
I guess it's kinda obvious what's going on -- just not to me :<.
Is there anything simple to fix it?
best regards
Bu iyi bir soru mu?
İtibar: 685,2b
3,4b
1,1b
2,6b
Try counting the blinks. These may be diagnostic blinks. Here's the service manual: http://online.manualspace.com/computer-m...
Bu yanıt yardımcı oldu mu?
+
+
Hey,
those blinks happen too frequently to count them.
(it's more like this: youtube.com/watch?v=40OHtc3gfgQ)
(And btw i didnt find any "blink codes" in those manuals.)
Thanks anyway :)
It's a well known problem and 3 years is about the time it starts on certain Samsung models (or even all models within a certain timeframe). The issue is the capacitors, they are from a sub par batch. Check out the youtube vids: http://www.youtube.com/watch?v=0hp1xF6eP... ...On the right hand side of the page and it will become clear, even how you can fix it!
Mine was a SyncMaster 226CW me thinks.
Torpor
Bu yanıt yardımcı oldu mu?
İtibar: 1
1
I fixed two Samsung 225bw lcds with this problem, by replacing three capacitors each (about $5 value total).
You can do the same, if you have a soldering iron, though it is not a difficult job. I found helpful information at: http://www.badcaps.net/forum/
Bu yanıt yardımcı oldu mu?
Son 24 Saat: 0
Son 7 gün: 3
Son 30 gün: 10
Her zaman: 9,650
