Ana içeriğe geç

The iRobot Roomba 560, an automated vacuum cleaner, was released in 2009.

14 Soru Tümünü görüntüle

Access to Roomba 560 circuit board.

I have a faulty Roomba 560. afer substitution teting I gather the problem is in the board.

I suspect the problem may be in some capacitor as the problem is intermitent but recurring.

simple screw driver dismantling left me short of the pcb.

Where can I find instructions to access the pcb?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
2 Yorum

Did you try to find solution from irobot customer care? I think you should not fix roomba by yourself, it's still a high tech machine anyway

tarafından

Oh, try to find answers form other sites like http://irobotroombareviews.com/ I've just catched it last week and it's quite useful

tarafından

Yorum Ekle

3 Cevap

Filtre ölçütü:
Seçilen Çözüm

Hi, Here's a link to the service manual. Hope it helps.

http://choisirsonaspirateur.info/wp-cont...

Bu yanıt yardımcı oldu mu?

Puan 3

2 Yorum:

+ research

tarafından

Thanks, most useful info

tarafından

Yorum Ekle
En Yararlı Yanıt

I had a similar problem, but had to replace some sensors on the board. Looked all over for a fix. Found an affordable one that worked well. took an hour or so.

http://eesolutions.ca/roomba_repair_kit....

I'd recommend it. Took forever to find the site though.

Bu yanıt yardımcı oldu mu?

Puan 5
Yorum Ekle

Hi.

Here is quick fix for your roomba.

http://www.abstractpath.com/2008/fixing-...

Cheers

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Axel Brinck sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 13,271