Eşyalarını Tamir Et Topluluk Mağaza

Model A1055

107 Soru Tümünü görüntüle

Seçenekler

Hard drive not recognized after installation.

Hello, my original drive was making terrible noises and I couldn't even reformat the drive. So I bought a new drive. I did the complete process to install the drive and the computer did not come up at all. I re-installed the original drive and the computer started up fine the first time. The next time it would not start. I reset the PRAM and from then on the computer does not recognize either one of the drives, it does not show the hard drive during OSX installation. Neither the original drive, nor the new drive.

Thanks for your advice.

Peace

Erich

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan -1
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

Format the new hard drive first.

Start up from the system installation disk, go to the second screen pull down menu, Utilities, Disk Utility select the drive on the left and format it and give it one partition. Now install the system.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

1 Yorum:

Good procedure +

tarafından

Yorum Ekle

Seçenekler

Check the connector

on the logic board - these were known to tear lose if handled to rough.

If this answer was helpful please remember to mark it accepted.

Good Luck,

N

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Erich Hentschel sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 6

Her zaman: 1,084