Ana içeriğe geç

Upgraded version of the Ascend P6, featuring a 4.7" 720P LCD display, a quad-core processor, and 2 GB of RAM. Released in 2014.

7 Soru Tümünü görüntüle

Power up problem on huawei ascend P6

Hi,

I have a problem with the power up of the mobile ascend p6 , its showing the first logo but than it turns off again but on charger is going on normally and can be used normally but when I unplug it it goes off again.

Thanks in advance.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

If the phone is only functioning when plugged in, the phone is not holding a charge. The battery is most likely faulty, and the best course of action is to obtain a new battery and replace the old one.

How old is the Phone ?

Bu yanıt yardımcı oldu mu?

Puan 0

5 Yorum:

For about 3mnts but my daughter through it in the diesel , i changed the screen and it was turning on but now is doning continues restarting

tarafından

Did you try to charge that Huawei with a USB cable to a laptop ?

which shows the battery indicator in the status bar when you loaded the phone via USB after 1 hour

Maybe the battery connector is loosen

tarafından

Its 96% but it doing continues reboot, how can i stop it pls ?

tarafından

And the phone righg now is without the bottom cover the curved one could it effect on the phone or no pls ??

tarafından

here a introduction for a factory reset ----> you will lost all your data on the phone !!!!

have you a backup ?

http://www.hardreset.info/devices/huawei...

good luck

PS. the bottom cover has no effect on it

tarafından

Yorum Ekle

Why my huwei p6 is switched off and on by itself.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Rodania Bugeja sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 3

Her zaman: 915