Eşyalarını Tamir Et Topluluk Mağaza

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Soru Tümünü görüntüle
Soru Kapandı

Seçenekler

Screen black after replacement, old screen doing the same thing.

I replaced a screen on an iPhone 6 with a new screen. As soon as I plugged in the new screen, the phone buzzed. When I went to test the new screen, the screen would not turn on. I replugged in the old screen and it would not turn on either.

The phone works fine and still buzzes when hooked up to a charger or a computer. I've tried the following with no luck:

-Unplugging the battery for awhile.

-Verified that all connectors are clean and no prongs are bent.

I've been replacing screen for a long time and have never come across an issue like this before.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

3 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

What kind of message do you get when plugged into iTunes?

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle
En Yararlı Yanıt

Seçenekler

Well, I figured it out. When removing the cable for the screen, I somehow knocked off a small resistor on the logic board. Figured it out from YouTube with people having a similar issue. :(

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Seçenekler

Are you sure you are plugging it correctly? If so, you might have smashed the connectors whether on the screen or the logicboard, they are very sensible. Remember not to hold the screen in 90º with the case, or you will damage the flexs.

Do you have another iPhone 6 where you can try on the LCD?

Let us know how it goes!

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 67