Ana içeriğe geç

Fourth generation of iPad, released November 2, 2012, available in 16, 32, or 64 GB models. Model Number A1458

218 Soru Tümünü görüntüle

Ipad in black screen can only be detected in DFU mode

My Ipad suddenly shut off, no response while pressing home and power buttons, pc cannot detect Ipad, and can only be detected in DFU mode, but while trying to restore it in ios 9.3.1, Itunes displayed "waiting for Ipad" and Ipad disconnects itself from pc while restoring.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:

This just happened to me with my iPhone, although I threw it against the wall first. Basically if you are unable to get it out of DFU/Recovery mode using the methods listed when you google "How to get iPad out of Recovery Mode" there is likely a blown fuse on the logic board. Does the iPad get hot when you have it connected? Then this is likely the issue.

It could also be that your battery finally gave out, and it could be time for a new one. Try the methods when you google that above, and see if it works. If not, it may be destined for the shredder, and in that case I hope you had iCloud set to automatically back up everything.

Bu yanıt yardımcı oldu mu?

Puan 0

3 Yorum:

Yes Sir Matt Gordon, Ipad gets hot when I connected it to itunes at DFU mode.

tarafından

Then likely it is a blown fuse. It would require board level repair, which you can find but it is rather expensive I believe. It is not something you can just swap and go, its something that is running hot and causing the recovery mode to kick in. Sorry :(

tarafından

Hey there what fuses do i need to check?

tarafından

Yorum Ekle

Hello could you fix the problem? I have the same problem but when i restore it on mac it says error 4014

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

kenesco2001 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 7

Her zaman: 1,627