Ana içeriğe geç

Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1169 Soru Tümünü görüntüle

Ear peice and proximity sensor not working

I replaced the headphone jack on my iPhone because I was not getting a good connection to various headphones. In putting it back together I must have not connected connector 3 correctly. I have tried a number of times to reconnect it. Does anyone have a photo of what it should look like or any suggestions as to what I may be doing wrong? If not what is my next step?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
Yorum Ekle

5 Cevap

Filtre ölçütü:
Seçilen Çözüm

Could be your connector? It is hard to notice, but sometimes they break and lift off the board slightly.

http://hectordtruong.blogspot.com/

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle
En Yararlı Yanıt

Here's a pic (the model in the pic is a 3GS, but the connector is the same in this instance):

Block Image

It has a gold tip that should be completely in the connector. Make sure the locking bar is down once the gold tip is in there.

Have you tried restoring it, or can you not get that far?

If that doesn't fix the problem, it seems that the front panel/digitizer is broken.

If THAT doesn't fix the problem, all signs point to logic board.

Bu yanıt yardımcı oldu mu?

Puan 2

1 Yorum:

+

tarafından

Yorum Ekle

I Must have knicked the #3 cable while putting it back together. I too purchased a new cable, and although it is not the easiest thing to replace I did do it and now everything works wonderfully.

Bu yanıt yardımcı oldu mu?

Puan 2

3 Yorum:

+great! now you can accept your own answer

tarafından

+ (You forgot your tick pollytintop)

tarafından

oops, thought it went on.

tarafından

Yorum Ekle

Might not be the logic board. That ribbon cable is fickle. I ahd this problem and just bought the cable (proximity sensor cable) off of amazon and replaced it. There's a youtube video on how to do it (since it's not immediately obvious), and it's an easy repair.

Also, remember to always shut off your phone before you open it. Seems that the proximity sensor or the cable may be especially sensitive to that.

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

+

tarafından

Yorum Ekle

dam im such an idiot i was trying to lift the white part of the connector and not the black thing and i then chipped abit of the white part but it has not tottally fallen off and the ribbon still fits in there thankfully but i guess its damaged and now i know how to fix it properly

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Scott sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 9

Her zaman: 7,901