Ana içeriğe geç

A series of 40 inch LCD HDTVs by Sony.

193 Soru Tümünü görüntüle

No picture, no sound, no menus, blinks on commands

My old Sony Bravia KDL40U2000 served me superb in about 10 years but now stopped suddenly, No picture, no voice.

Can not see to the menu or anything else. (The back light is OK).

The unit reacts to the remote control, as can be seen on the blinking green LED.

Tried factory reset (as per the original specific maintenance manual) - No avail.

As I can not see anything, I do not know the state of the unit, but I tried several sources (HDMI, PC, SCART) for no avail.

I opened the back (yes, I am an elect. eng.) and could not see any damaged component (capacitors, transistors, etc.).

Before going deeper to measure voltages etc,. I would like t know if anyone had this before, and suggested fix.

I do have all the schematics as provided with the unit.

Thanks

Sam

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
1 Yorum

Do you get any blink code form the front LED?

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

I'm sure you know how to recognise failing electrolytic capacitors by the domed tops or leakage. You might just try replacing the larger ones anyway for good measure.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

samuel tal sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 210