İtibar: 23
3
1
The notebook does not think the internal HD by disk utility, I can boot from cd rom and the hd connected to the internal USB port, it is functioning normally. I installed another HD compatible and still does not recognize. It may be a defective cable or flex in the parent? Thanks.
Marco.
Bu iyi bir soru mu?
İtibar: 78,2b
385
96
162
At this point I would try replacing the cable as the most likely and least costly part. On general principles try resetting the PRAM and SMC--link provided. If these don't work get back to us.
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1379
MacBook Pro 13" Unibody Mid 2009 Hard Drive Cable Replacement
Bu yanıt yardımcı oldu mu?
Glad you could understand the question because I can't.
Performed the procedures suggested and still nothing.
Yes, Rj is correct. I would replace the flex cable. +
Son 24 Saat: 1
Son 7 gün: 5
Son 30 gün: 6
Her zaman: 2,927
4 Yorum
Performed the procedures suggested and still nothing.
Marco tarafından
Could you restate the question. I just don't understand it as stated?
mayer tarafından
1. Question mark at startup.
2. No problem in HD.
3. In disk utility the internal hard drive does not appear.
4. However, the USB port it works normally.
4. CD-ROM also gives boot.
5. I think the problem is with the flex cable from the HD.
Marco tarafından
Guys, is not the flex cable problem, because the hd is running normally.
Marco tarafından