ÇÖZÜLDÜ: Unable to unscrew 1.2mm and 1.3mm Philips #000 screw. - iPhone 5s

Unable to unscrew 1.2mm and 1.3mm Philips #000 screw.

I have the Philips #000 screwdriver from iFixit.

However, I seem to only be able to unscrew the 1.7mm screws. No luck with the smaller 1.2mm and 1.3mm screws. I am currently at this step.

Is this the expected scenario ?

Thanks in advance :)

Gönderildi: 19 Ağu 2016

Seçenekler

Have you tried a little bigger driver? I normally use a 00 driver on iPhones.

Bu yanıt yardımcı oldu mu?

Evet Hayır

Puan 3

5 Yorum:

Dang, I do not own a #00 driver. Will try to obtain one and see if it works.

Daylen tarafından 19 Ağu 2016

Thanks for the info, I've been using #0 Phillips head on iPhones which is probably not optimal.

Ben tarafından 19 Ağu 2016

I got the screws out, used a screwdriver that I borrowed from a friend. Kinda disappointing that the ifixit screwdriver does not work..

Daylen tarafından 23 Ağu 2016

Yeah sometimes I have to use the german phillips head screw driver that pretty much never gets worn out and works for philips head phone screws that are hard to take out.

Ben tarafından 23 Ağu 2016

i am having the same problem. Which screw driver did you get from your friend?

vcmtz2 tarafından 4 Ağu 2018

Yorum Ekle

iPhone 5s

Unable to unscrew 1.2mm and 1.3mm Philips #000 screw.

1 Cevap

Yanıtını ekle