Eşyalarını Tamir Et Topluluk Mağaza

Repair information and guides for the Apple iPhone 5c that was announced on September 10, 2013. Model: A1532, A1456

1233 Soru Tümünü görüntüle

Seçenekler

iPhone no sound, black screen, no vibration when plugged in

I dropped my iPhone and it has a black screen, doesn't make any sound, doesn't vibrate when plugged into the charger. But when i plug it into iTunes it recognizes my phone and it shows that my phone can still charge. DO you guys thin my screen and digitizer is broken or my logic board. Like when i plus it into my computer, my computer makes a sound instead of the iphone, and when i hold power and home when plugged into the comp for 10 sec, it makes another sound.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 4
1 Yorum

So i woke in the morning to found out that my iphone x that's on the charger won't turn on , i tried pressing the power button it won't turn on , i tap on the screen it won't work. then i following the force resting steps and it's didn't work and i plug it up to the computer and the iTunes doesn't show up ,what should i do now ?

tarafından

Yorum Ekle

5 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

might be stuck in recovery

try using the mute switch to see if it vibrates when switching.

if it vibrates then its a screen issue. if not then its in recovery.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

4 Yorum:

it doesn't vibrate

tarafından

does itunes say its in recovery or does it say the entire phone info like normal? if its normal then the phone might be disabled or some how the vib is not working.

tarafından

how can i exit on the recovery mode?

tarafından

recovery mode will automatically restart to normal operation after period of time reboot on its own. but you can always hold power and home to do a normal restart that will start a normal boot sequence.

tarafından

Yorum Ekle

Seçenekler

I have the same problem!

after a very very small stroke the screen turned black, no sound, no vibration. but itunes recognizes it but I can not access it because I can not put the pin and make a backup. do you think you disconnected the connector? the technician told me the faulty display. But the vibration and the sound that do not work? are all connected to the screen???!

thank you

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

4 Yorum:

Hi I have iPhone 7 plus as same problem. Did you solve that problem?

Please tell me how.

Thank you so much!

tarafından

I am wondering the same thing. I think usually if the screen is bad the vibrator and sound still work. I am very confused on mine. No drops. No water damage.

tarafından

Hi! How did you manage to solve it? Have the same problem here too

tarafından

Have the same problem, changed the whole motherboard and nothing, I don't know what else I can do, hopefully someone has an answer to this problem

tarafından

Yorum Ekle

Seçenekler

Good morning, how did you solve the problem?

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

1 Yorum:

Hi! Have you solved the problem? Have this too

tarafından

Yorum Ekle

Seçenekler

I have had the same problem after replacing the battery on iPhone SE. I thought the new battery was bad, but when I plug it in iTunes starts backing up and syncing like normal and show the battery charging.

I have done a lot of iPhone repairs and I cannot figure out if I did something wrong or if I just had really bad timing.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Seçenekler

How did you solve it? Have this problem too

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

1 Yorum:

I didn’t solve it. I had to scrap the phone. Replacing the screen didn’t do anything.

tarafından

Yorum Ekle

Yanıtını ekle

muning sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 9

Son 30 gün: 30

Her zaman: 3,542