Ana içeriğe geç

Early 2011 model, A1278 / 2.3 GHz i5 or 2.7 GHz i7 processor.

736 Soru Tümünü görüntüle

computer running slow, replaced with a ssd, not booting

so i bought this laptop, the women claimed it was water damaged, i opened it up and there was no sigh of any damage, everything was working just super slow, i ordered a samsung 850 evo 250GB, got a bootable usb ready to install El Capitan, but it always gets stuck while starting up

Block Image

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

MacBook Pil Tamir Setleri

Başlangıç $69.99

Buy Now

MacBook Pil Tamir Setleri

Başlangıç $69.99

Buy Now

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

OK, lets backup here...

Using your other Mac via the SATA to USB adapter can you see the drive using Disk Utilities? Correct? If you can reformat the drive and create a new GUID partition map as well as create a Mac OS Extended (Journaled) partition. Once done from this same Mac, follow these steps: How to install OS X on an external drive connected to your Mac While this TN is assuming you are using it as a spare boot drive the steps are the same for setting up a fresh drive for another system. Jump to the 'Install from your normal startup disk"

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle
En Yararlı Yanıt

I would start off replacing the HD cable as they tend to breakdown. Here is the IFIXIT guide: MacBook Pro 13" Unibody Early 2011 Hard Drive Cable Replacement and this is the cable you want as it's the improved version: MacBook Pro 13" Unibody (Mid 2012) Hard Drive Cable.

But before you do that visit any Apple Store as Apple has been replacing them for free for a lot of people. Put the original drive back in before you go.

Let us know how it goes.

MacBook Pro 13" Unibody (Mid 2012) Hard Drive Cable Resmi

Ürün

MacBook Pro 13" Unibody (Mid 2012) Hard Drive Cable

$44,99

Bu yanıt yardımcı oldu mu?

Puan 3

Yorumlar:

thanks for your reply, i didn't mention that i connected the ssd via usb and tried to boot that way, didn't show up (hold command during startup) i also tried that on my imac (mid 2011, 21.5) it didnt show up either, i formated the drive with disk utility like it said in alot of youtube videos, didnt show up either, but my bootable usb always shows up

tarafından

Bummer ;-{ Sometimes when the cable goes it messes up the drive too. If you can't reformat it its time for a new drive. As its a new samsung 850 EVO drive you should be able to return it where you bought it to get a new one or contact Samsung for a replacement under warranty.

tarafından

I'm sure the drive is fine. i have to agree with Dan on this and would change the cable or you could even hook up the SSD to a SATA to usb adapter and try to boot ... if you get the same issue, it is not your cable. usually if its the cable you will get a file with a question mark instead of the apple as the computer cannot see the SSD.

tarafından

@rebootgozo - FixPal already gave the USB connection a try. Sadly, I suspect the drive has bit the dust.

tarafından

shame ... :( its quite rare that an SSD failed...

tarafından

5 daha fazla yorum göster

Yorum Ekle

Yanıtını ekle

FixPal Repairs and Tutorials sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 3

Her zaman: 364