Eşyalarını Tamir Et Topluluk Mağaza

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Soru Tümünü görüntüle

Seçenekler

After Replacing Proximity Sensor, the Front Camera Becomes Blurry

I replaced my iPhone 6 front screen and the proximity sensor stopped working. After that, I tried changing my proximity sensor with a new one, which replaces the front camera as well. However, after changing it, everything works fine except that the front camera is blurry and unable to focus.

Are there smudges on the lens of the camera? Or did I not position it correctly in the camera socket?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Yo should be able to look at the hole in the top of the screen where the camera sits to see if there is a smudge obscuring the camera, if there is then clean it with isopropyl alcohol and a cotton bud. If there isn't anything up there then the front camera may be faulty.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2
Yorum Ekle

Yanıtını ekle

Kelvin sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 499