Ana içeriğe geç

Repair guides for Android cell phones manufactured by ALCATEL.

971 Soru Tümünü görüntüle

I Formatted Everything It Needs To Work.

I have an Alcatel One Touch Evolve 2 and I had plugged the phone into my HP laptop to transfer some more music to it and it told me that the computer could not recognize my phone and asked me to format it and me not thinking that it was going to erase everything the phone needed to work, I had formatted it. I thought it was only going to erase my SD card but that wasn't the case. Now the phone won't turn on and when I plug it back into my HP laptop, the computer will begin to scan the phone, but then it will stop. The computer will keep trying and the same thing will happen again. Is there any way that this can be fixed or am I stuck with a paper weight for a phone?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Yararlı Yanıt

This requires installing a custom system, You bricked your phone.

Google "How to fix a bricked phone", there are many ways. there are also youtube videos showing how

It is risky business

Its difficult to do though and requires some experience, You need Custom Recovery, System, Drivers, etc

Be careful when formatting a phone. only use the internal data wipe functions.

Bu yanıt yardımcı oldu mu?

Puan 5
Yorum Ekle

Go into bootloader and do a factory reset. if you dont know how to get to bootloader just google it for your phone.

Bu yanıt yardımcı oldu mu?

Puan 0


thats the thing, i have tried to get the bootloader function to work but it just wont.


Yorum Ekle

Yanıtını ekle

Fredrick Wolford sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 63