Ana içeriğe geç

Repair guides and support for Dell Netbooks, a class of small, lightweight laptop computer from the late 2000s.

17 Soru Tümünü görüntüle

A cabinet file necessary for installation cannot be trusted

A cabinet file necessary for installation cannot be trusted. Please verify the Cryptographic Services are enabled. When i tried to install directx i got this message " A cabinet file necessary for installation cannot be trusted.

How to solve this..

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 12
5 Yorum

how to verify cryptographic services are enabled

please replay to hurryup

tarafından

please help me

tarafından

i have fixed on https://www.ahmedhub.us

tarafından

@shahzaib khalil

Try this!

Set Cryptographic Services to automatic Set the Cryptographic Services to Automatic, and then try to install the program again. To set the Cryptographic Services to Automatic, follow these steps:

Start the Administrative Tools utility in Control Panel.

Double-click Services.

Right-click Cryptographic Services, and then click Properties.

Click Automatic for Startup type, and then click Start.

Refer: http://support.microsoft.com/kb/822798/ and follow all the methods listed in the KB article.

Man is the only animal that laughs and weeps; for he is the only animal that is struck with the difference between what things are and what they might of been.

tarafından

mercy.the best wishes for you

tarafından

Yorum Ekle

3 Cevap

Filtre ölçütü:
Seçilen Çözüm

Hey Bro, I don't know if you still have issues with this but this is for anyone how is still experiencing this issue when trying to install DirectX.

I searched for hours and struggled to get this fixed, long story short I finally got it fixed!

Please try using the following link. Note: this is not a scam nor virus , it's from the official website (Microsoft)

https://www.microsoft.com/en-us/download...

Installing that fixed my issue.

1.Create an empty folder (The folder's name isn't important, just leave it blank for all I care)

2.Put the directx_Jun2010_redist.exe (That you just downloaded) into that empty folder.

3.Install/open the "directx_Jun2010_redist.exe"

4.Scroll through all the contents that were extracted, look for "DXSETUP.exe" and Install that.

5.Click through the on screen instructions and allow it to complete.

6.What are you still doing here you're DONE!! :)

Bu yanıt yardımcı oldu mu?

Puan 66

36 Yorum:

thanks, its work

tarafından

I just registered to thank you. Your solution solved my problem after hours of struggling. Thank you very much!

tarafından

I just registered to thank you. Your solution solved my problem after hours of struggling. Thank you very much!

tarafından

Thanks alot bro..

It worked....

Legendary

tarafından

Thank you very much. I had to register to thank you

tarafından

31 tane daha yorum göster

Yorum Ekle

This is what I did and it worked!!!

1. navigate to \Windows\System32\directx\ or \Windows\SysWow64\directx

if you have Windows 7 x64.

2. Click on "organise" file menu, then "folder and search options" then

in the "View" tab check "show hidden files and folders" and then "ok"

3. websetup folder will be visible now. go in there and delete all

contents.

4. run "dxwebsetup" again.

Works for me under Windows 10 64bit.

Bu yanıt yardımcı oldu mu?

Puan 2

3 Yorum:

Thanks man!!!! i was going gray over here that really helped

tarafından

Most welcome

tarafından

When I try to run dxwebsetup I get some error about a cabinet file and cryptographic services

tarafından

Yorum Ekle

ممنون در رفع مشکل من خیلی موثر شد.همیشه پر توان باشید.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Winkigreen sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 7

Son 30 gün: 79

Her zaman: 44,256