Eşyalarını Tamir Et Topluluk Mağaza

The Signet series was Kodak's top American-made 35mm camera line in the 1950's. It is one of only two Signet models that contains a range finder, and the only one not made mostly of plastic.

5 Soru Tümünü görüntüle

Seçenekler

Why does my image look blurry when looking through the viewfinder?

Every time I look through the viewfinder on my camera the view looks blurry and out of focus. I try to adjust the view, but it does not help.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

Make sure that the camera’s viewfinder is clean. If that does not help, then the beamsplitter within the camera could be cracked or possibly dirty. Use the information under the Beamsplitter Hazy heading in the following guide: Kodak Signet 35 Troubleshooting.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Seçenekler

Try to remove the top camera and check if viewfinder ,beamsplitter ,mirror rangefinder and rangefinder glass is clean , and if not try to clean with clean solution for lens.Is possible that coating of beamsplitter is gone out , and then it must be replaced.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Christopher Negron sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 15

Her zaman: 1,078