Ana içeriğe geç
Onarım Topluluğuna Katılın - Hesap Oluşturun

Bu cihaz, ahşap işleri için tasarlanmış tek devirli, elde taşınabilir bir frezedir. Orijinal 690 freze 1973 yılından beri piyasadadır ve o zamandan beri küçük iyileştirmeler yapılmıştır.

Why does my router keep jamming?

While using the device, it stops working, but is still on and the bit appears to be stuck in a static position.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

Most likely there is something lodged in the internal mechanisms of your router that is causing it to jam. I would start by following the guide on this device page for getting to the brushes and make sure they are cleaned of any large pieces of debris.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Jaymes Ullrich sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 11

Her zaman: 316