Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı


Announced on October 16, 2014, identifiable by the model number A1347 and EMC 2840.

184 Soru Tümünü görüntüle

Pulled fan connector off logic board

While trying to install as SSD, I pulled the part of the fan connector that's soldered onto the logic board completely off. In other words, I pulled the actual socket off the logic board.

Anybody know what to do now?

Any advice is humbly appreciated...

Yanıtlandı! Cevabı görüntüleyin Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

Common to do this on the Mac Minis. Grab a micro soldering iron, and solder it back on at the anchor points.

If the connector is destroyed, replace it with a new one

If some of the pads are pulled off, you will need to solder wires to the correct location, and will need a schematic and board view.

Good luck!

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Thanks for the info, Reece. Can you point to any type of instructional video for this? I've done soldering on guitars before but never anything with a circuit board, or this small...

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Jeff sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 7

Her zaman: 479