Ana içeriğe geç

Model A1224 / Mid 2007 and Early 2008 / 2, 2.4, or 2.66 GHz Core 2 Duo processor

549 Soru Tümünü görüntüle

Start Up Chime repeats

Hello - My iMac, 20 inch early 2008 won't start up. When the power button is pressed i get the start up chime, the fans turn on, the HD spins then the start up chime sounds again and again in an endless loop.. No video comes on, the keyboard is non responsive. This came upon as a result of over heating I think. Months before this happened the iMac was working sluggish and had frequent freezes.. I opened up the iMac and it had heavy dust clogs on the vents and all inside. Only #1 and #2 LEDs light up..

I have backed up all data on the Drive so the drive is OK.. The memory Chips are fine.. Visually the Motherboard looks fine.. All the tools I have are those for tearing things apart. I cannot test for voltages or any other electronic stuff..

Does anyone have Idea of what part was affected??

Thanks in advance..

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Sounds like a GPU failure. I have had a 70% success rate using a hot air flow on the video card, Here's how to get it out: iMac Intel 20" EMC 2133 and 2210 Video Card Replacement

Bu yanıt yardımcı oldu mu?

Puan 5

4 Yorum:

Oh Great! I was hoping someone with the knowledge like you answered my call.. Very much appreciated. There isn't much on the internet on this topic. The Repeating startup chime I mean.

Can you please elaborate on the Hot Air flow.. I Can do the teardown without a hitch - all thanks to the detailed instructions on this website.

I Take this time to thank all at iFixt.com for the great job. And to the People who take time to answer and share their knowledge with the rest of the world..

Thanks!

tarafından

Thanks Mayer!

tarafından

What is this hot air flow method on the GPU? I have the same issue but many other articles I read mention the MLB - main logic board - as the problem?

tarafından

Mark if you are only going to use it rarely, you can go with a cheap one like this

858D Rework Station Hot Air Gun Kit SMD Iron Soldering Solder Holder Tool New US

https://www.ebay.com/itm/858D-Rework-Sta...

tarafından

Yorum Ekle

Yanıtını ekle

NPDesigns sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 4

Son 7 gün: 9

Son 30 gün: 10

Her zaman: 2,037