White screen on iMac 2011 27"

Question

iMac Intel 27" EMC 2429

Model A1312 / Mid 2011 / 2.7 & 3.1 GHz Core i5 or 3.4 GHz Core i7 Processor, ID iMac12,2

709 Soru Tümünü görüntüle

jonasbak @jonasbak

İtibar: 1

Gönderildi: 14 Ara 2016

Seçenekler

White screen on iMac 2011 27"

Hello everyone.

I have a big problem.

First of all, i know there are many of these threads about this problem, but i not manage to find a solution for me.

I have a iMac 27" mid 2011. Everything works fine, until i tried to install Bootcamp.

The installation went fine, and i could boot in Windows.

There was some Windows updates i will install, and Windows ask for reboot.

After that reboot, my iMac comes with only a white screen. and nothing else. And altso the chord sound.

I trid reset PRAM, and, COMMAND+S, D, Command+SHIFT+R+P and so on.

Nothing workes.

Is anyone have an idea?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır

Puan 0

Yorum Ekle

2 Cevap

Seçilen Çözüm

mayer @mayer

İtibar: 685,3b

MacHale Enterprises

3,4b

1,1b

2,6b

Gönderildi: 14 Ara 2016

Seçenekler

A white screen usually indicated a problem relating to the hard drive. Try starting up holding down the option key and see if you can get to the repair partition. If so, run Disk Utilities.

Bu yanıt yardımcı oldu mu?

Evet Hayır

Puan 3

3 Yorum:

I tried that. But it's not working. I worked with this for a long time, and an hour ago i decided to take out the HDD. Unfortinately one of the pins on the display ribbon broke, so i ordered a new one now. I will update later on the week, when i tried a new harddrive.

jonasbak tarafından 14 Ara 2016

How did it go?

Peter Annerback tarafından 28 Oca 2017

Sorry my late answer on this topic. As meyer said it was hard drive related. I took out the hard drive and formatted it from another computer. Then I put the hard drive back in and after that I could start my iMac again and install macOS from start

jonasbak tarafından 29 Oca 2017

Yorum Ekle

I tried that. But it's not working. I worked with this for a long time, and an hour ago i decided to take out the HDD. Unfortinately one of the pins on the display ribbon broke, so i ordered a new one now. I will update later on the week, when i tried a new harddrive. — jonasbak
Sorry my late answer on this topic. As meyer said it was hard drive related. I took out the hard drive and formatted it from another computer. Then I put the hard drive back in and after that I could start my iMac again and install macOS from start — jonasbak