Eşyalarını Tamir Et Topluluk Mağaza

Apple iPhone 5s, 10 Eylül 2013 tarihinde duyuruldu. Bu cihazın tamiri, daha önceki modellerinkiyle benzerdir; tornavida ve plastik açma araçları gerekir. GSM ya da CDMA olarak, 16, 32, 64 GB kapasiteli Gümüş, Altın ve Uzay Grisi renklerinde mevcuttur.

3530 Soru Tümünü görüntüle

Seçenekler

Very strange screen problem

Hi

I had this problem with several customers now. Before I replace the new screen for customer, I always test the new screen, pluging the LCD and digitizer and turn it on, testing the screen.

So today a customer with a cracked 5S screen came in, I did the same thing. The new screen works great. I put camera and home button on, and install the screen, turn it on.

Not working! I tried a charge to turn it on. No response. The phone is like dead. I unplug every connector and the battery connector, plug all again and turn it on. No response.

Desperate. Try another screen. The same thing exactly. When just plug LCD and digitizer, every thing is good. After put camera and homebutton, not working.

Any body knows the reason?

Thanks,

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

Did you try with just the camera or just the home button to find which one is faulty? Try a new camera assembly first, these are usually defective.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 6

8 Yorum:

NO, I didn't. I just unplug the battery and plug it back and try to turn it on. No response. However, if I put the cracked screen back, with camera and home button, , everything works fine.

tarafından

Where do you get your screens from? It could be a faulty screen interfering with something else.

tarafından

Like said above either a faulty screen and/or front camera flex.

tarafından

If screen is defective, why the first time I test it , it works. Only stop working after I put everything on it.

tarafından

So? Go unplug the front camera flex then try turning it on? No issue yet? Then try home button flex.

If stop one replace the part.

And yes I have had a internal cable damage from ribbon flex just from taking it out from the screen to put into new screen assembly without being able to physically see it. I concluded the front camera cable got damaged during disassembly.

I'm not sure whether you have tried that or not. If you haven't you are wasting your time lol.

tarafından

3 tane daha yorum göster

Yorum Ekle

Yanıtını ekle

Albert Zhan sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 7

Her zaman: 109