İtibar: 13
1
Hey guys,
I wanted to ask if it's possible to soften the glue with a hairdryer (2100W)?
Do you guys think it's gonna work?
Thanks in advance and best wishes,
Andy
Edit:
A hair dryer works just fine. Keep heating it until you can't touch it anymore, if you have one you can use a suction cup which will make lifting the display way easier.
Thanks everyone, my girlfriend will definitely enjoy it :)
Bu iyi bir soru mu?
İtibar: 10,3b
15
29
6
In short yes, it will work.
A heatgun will produce more heat than a hairdryer but the hairdryer will work just will take longer.
Hope this answeres your question!
Bu yanıt yardımcı oldu mu?
Thank you for your fast response Cameron :) *thumbs up*
So if the glue hasn't softened yet, just keep going right?
Again thank you very much :)
Yes. Do it until the glass is just too hot to touch
@mayer better?
Cam, it could work, especially if it is a high wattage dryer. A link to the guide might be helpful.
@mayer ok and for the guide. you mean on how to replace the screen? I didnt add it as that wasnt really the question and this guy seems to know what he is doing.
Son 24 Saat: 3
Son 7 gün: 3
Son 30 gün: 4
Her zaman: 430
1 Yorum
2100w hair dryer, that's more then my heat gun!
L Pfaff tarafından