Eşyalarını Tamir Et Topluluk Mağaza

Model A1418 / Late 2012 / 2.7 & 2.9 GHz Core i5 or 3.1 GHz Core i7 Processor

212 Soru Tümünü görüntüle

Seçenekler

Logic Board Faulty or Damaged?

Hello There... I was wondering if someone can give some clue what is happening in this situation..:

problem: iMac won't turn on...

tests:

1. Removed lcd/glass panel successfully, I notice that NONE diagnostic led was on... so...

I went..:

2. I checked de AC cable, and it gave me the 120V AC from the outlet so we are good...

3. checked inside AC input in the Mac, and also gave me the 120V AC... (good)

4. I plugged in the PSU, and tested some pins with the ground pin... and 3 pins gave me 12V DC. (so I think the PSU is fine)

What else can I try????

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

The PSU may receive power but is not sending further to the board, before going after a logic board damage i would try with a new power supply. Most of the cases when no diagnostic led is on the board doesn't receive power due to a faulty power supply.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

5 Yorum:

@kaykay another one hits 500

tarafından

even though the PSU pinout gave me 12V DC on 3 pins?... I will try another psu..

tarafından

Always keeping an eye out for me @mayer. Thank you :)

tarafından

Hello there, after all.. I installed a new PSU, the imac start working again... but.. after several hours the iMac was on.. it turned off... so I checked again inside, and I have no leds on... (again)... I have no clue what is happening...

tarafından

@makibuki //have u found problem. i have the same issue

tarafından

Yorum Ekle

Yanıtını ekle

jbermudez27 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 8

Her zaman: 261