Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Bluetooth on-ear headphones with 40 mm drivers and a 610 mAh battery.

17 Soru Tümünü görüntüle

The Left side of my headphone is not working

Hello,

The left side of my headphone is not working now. I charged it fully but no use. I tried connecting it with the cable but still no use. I've no idea what to do as it's out of warranty and JBL is telling me to pay 75% of the MRP. Any solution guys?

Appreciate your assistance

Regards,

Josh

Bu soruyu yanıtlayın Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 8

Yorumlar:

@joshanjoy check this viudeo https://www.youtube.com/watch?v=1CMVoqfh... for a teardown to see how to get into your headphone.

tarafından

I also have the same problem and I must still fly for 18 hours from London to Cape Town tomorrow. This really sucks!

tarafından

Yorum Ekle

Essential Electronics Toolkit

Small Toolkit. Big Possibilities.

Shop Toolkits

Essential
Electronics
Toolkit

Shop Toolkits

3 Cevap

Filtre ölçütü:
En Yararlı Yanıt

Left side,

  1. you remove the padding
  2. you remove 4 screw
  3. you use a very small screwdriver to pry the pivot point to be able to gently slide the speaker off.
  4. you will see that the speaker wires for the left speakers are no more soldered.

#

Block Image

  1. pull them a little bit to have more room to work
  2. use a soldering iron to fix them back respecting the positive/negative connection(red+/black-)

#

Block Image

Voila! Worked for me.

Sorry for bad english

Bu yanıt yardımcı oldu mu?

Puan 6

Yorumlar:

hello! I'v checked it all trough, there's not a single wire disconnected.

tarafından

Yorum Ekle

Hello....I have a problem

I use JBL headphones.

I accidentally pulled the wire really fast and then I couldn't see the earphones mark anymore

I can hear from the phone and one side of the earphones at the same time.

The wire also have a strange curvy spot....I think something is broken

(Sorry for bad English)

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

@joshanjoy there is a crossover cable from one driver (speaker) to the other, check that out. Use a multimeter and check for continuity. Also check the solder connections on the driver (speaker) make sure the cable is still soldered on.

Bu yanıt yardımcı oldu mu?

Puan 0

Yorumlar:

I'll check

Thanks for your reply @oldturkey03

:)

tarafından

Yorum Ekle

Yanıtını ekle

Joshan Joy sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 27

Son 7 gün: 188

Son 30 gün: 919

Her zaman: 40,294