Eşyalarını Tamir Et Topluluk Mağaza

A1418 / EMC 2833 / Late 2015 / 3.1 GHz Core i5 or 3.3GHz Core i7 Processor. Released October 13, 2015.

96 Soru Tümünü görüntüle

Seçenekler

The cord joining from the power button to the logic board cut

Dear iFixit community,

I was in the process of upgrading my (iMac 21.5" 4k) and whilst I was removing the speaker (for easier access to SATA cable) the cord joining from the power button to the logic board (which travels along the left speaker) cuted. I was not applying much force and am very surprised that it broke. This means I am now unable to power up my iMac. Is there anything I can do to replace this part or somehow rejoin the wire? Any information would be GREATLY APPRECIATED!! (Even if it is "there is nothing you can do")

Thanks very much!

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
1 Yorum

Please add some images so we can see what you do. Also which exact mode iMac do you have?

(Model number should be on the bottom of the stand.) Adding images to an existing answer

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

If only a 2 wire cable was cut you can repair this the old fashion way: strip the wire at the end an redo the connection, if its to short ad some wire and be sure to isolate every wire at the joints.

Something like

Block Image

If you have a soldering iron just resolder the wires

Something like this

Block Image

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Yanıtını ekle

ghmax2010 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 6

Her zaman: 103